Online Shopping Blog

Pyle Great Amplifier/Subwoofer/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + Pair of PLW12BL 12-Inch 800W Subwoofer + PLAM14 20 Ft. 8 Gauge 1000W Amplifier Hookup For Battery Head Unit and Speakers Installation Kit.

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control, Switchable Bass Boost, Power And Protection LED Indicators
• Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off.
• 2x PLW12BL Blue CD Wave Electro-Plated Cone, Wide Butyl Rubber Surround With New Pattern, Blue steel Basket, Bumped Vented Extended Pole Piece, 2″ High Tempreture Kapton Voice Coil, 4 Ohms Impedance,
• 90 oz. Magnet Structure, 800W Peak Power, Fs:26.2, Qms:5.81, Qes:0.90, Qts:0.78,Vas (Cu ft)4.146, SPL: 85.5dB.
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200 Dimension: 10.63″ H x 1.42″ W x 8.75″ L.. (2X) PLW12BL Overall Diameter: 12.20″ Mounting Depth: 5.34″.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire , 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 C

List Price: $ 219.99

Price: $ 139.99

Pyle Full Amplifier/Subwoofer/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + Pair of PLWCH12D 12″ 1200W Ultra Slim DVC Subwoofer + PLAM14 20 Ft. 8 Gauge 1000w Amplifier Hookup For Battery Head Unit and Speakers Installation Kit

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control, Switchable Bass Boost, Power And Protection LED Indicators
• Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off
• 2x PLWCH12D: 12″ High Quality Poly Mica Cone, Butyl Foam Surround, Dual 2.5″ High Temperature Kapton Voice Coil, Independently Fused 20 Amp Speaker Terminals, 75 Oz Magnet Structure, Power Handling: 600W RMS/1200W Peak,
• Frequency Response:28 Hz – 2.2K Hz, Impedance (Per coil) : 4 Ohm, Fs:29.1, Qms:4.08, Qes:0.44, Qts:0.396, Vas (L)102.18, Efficiency: 92 dB, Includes Installation Template.
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200 Dimension: 10.63″ H x 1.42″ W x 8.75″ L.. PLWCH12D Dimensions: 13.1 x 4.4 x 13 inches.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire , 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Bla

List Price: $ 299.99

Price: $ 149.99

Pyle Amplifier/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + PLAM14 20 Ft. 8 Gauge 1000w Amplifier Hookup For Battery Head Unit and Speakers Installation Kit

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control,
• Switchable Bass Boost, Power And Protection LED Indicators, Low Level Inputs, Gold Plated RCA Inputs Outputs,
• Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off,
• S/N Ratio: 95db T.H.D: 0.04%, 2×10 Amp Maxi Type Fuse, Freq. Response: 15Hz – 30KHz
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200: Dimensions: 10.63″ H x 1.42″ W x 8.75″ L.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire
, 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse,
In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Black Grommet.

List Price: $ 99.99

Price: $ 79.99

More Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Products

Pyle Deluxe Car/Truck/SUV/Boat Amplifier Package, PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier + Pyramid PBIN3 1000 Watt 20 Feet Amplifier Installation Wiring Kit

• Pyle PLA2200: 700 Watts x 2 Output Slim Size Amplifier Design For Easy Installation
• Variable Hi/Lo Electronic Crossover Network, Gold Plated RCA Inputs Outputs
• Power And Protection LED Indicators, 1400 watts x 1 Bridged Output
• Bass Boost, thermal protection, overload protection, short circuit protection
• Pyramid PBIN3: 20ft 8 Gauge Red Power Wire, 4ft 8 Gauge Black Ground Wire, 17ft Right Angle RCA Interconnect Audio Cable, 3ft Black Split Loom Cable Conduit, 60A MAXI Type Nickel Plated Fuse

Outfit your car or truck with the new Deluxe amplifier package from Pyle/Pyramid, which includes the hottest 2 channel amplifier on the market, plus a complete wiring kit for easy installation.

List Price: $ 169.99

Price: $ 74.99

Pyle Complete Deluxe Audio Package for Car/Truck/SUV — PLA4200 4 Channel 2000 Watt Bridgeable Mosfet Amplifier + PL63BL 6.5-Inch 360-Watt 3-Way Speakers + PL6984BL 6-Inchx 9-Inch 400 Watt Four-Way Speakers + PLBWS212 Dual 12-Inch 1200 Watt Bandpass withNeon Woofer Rings + PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit.

• PLA4200: 500 Watts x 4 Output,, 1000W x 2 Bridged Output(500W x 2 + 1000W x 1) Dual Variable Hi/Lo Electronic Crossover Network, Dual MOSFET PWM Power Supplies, Variable Input Level ( Gain ) Control, Dual Switchable Bass Boost, Power Protection LED Indicators, Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal / Overload / Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off, S/N Ratio: 95db, T.H.D 0.04%, Freq. Response: 15Hz – 30KHz, 2×20 Amp Maxi Type Fuse.
• PL63BL: One Pair 6.5″ Three-Way Triaxial Speaker Systems, Power Handling: 180 Watts Rms / 360 Watts Max, Non-fatiguing Butyl Rubber Surround, 1″ High Temperature ASV Voice Coil, Standard 6.5″ Size Fits OEM Locations, Blue Poly Injection Cone, 20 oz Magnet Structure, 1″ Neodymium Film Dome Midrange, 3/4″ Piezo Tweeter, Impedance: 4 Ohm, Sensitivity: 89 Db, Frequency Response: 90Hz – 20Khz, Includes Grills, Wires And Mounting Hardware. Mounting Depth: 1.9″.
• PL6984BL: 1 Pair 6″X9″ Four-Way Quadriaxial Speaker Systems, Power Handling: 200 Watts Rms / 400 Watts Max, Non-fatiguing Butyl Rubber Surround, 1.25″ High Temperature ASV Voice Coil, Standard 6″ X 9″ Size Fits OEM Locations, Blue Poly Injection Cone, 50 Oz Magnet Structure, 1-1/2″ Film Dome Midrange, 1″ Film Dome Tweeter, 3/4″ Piezo Tweeter, Impedance: 4 Ohm, Sensitivity: 92 Db, Frequency Response: 50Hz – 20Khz, Includes Grills, Wires And Mounting Hardware.
• PLBWS212: Two 12″ High Power 4 Ohm Subwoofer, Silver Polypropylene Cone, 2″ Aluminum Voice Coil, Specially Treated Black Rubber Edge Suspension, Blue Neon Speaker Rings, Bandpass Alignment For Extra Deep Bass, Plexiglass Front Window, 2 Tuned Ports, 1000 Watts Max Power Handling, Frequency Response: 35Hz-1k Hz.
• PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire, 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Black Grommet.

PLA4200 Dimensions: 10.63″ H x 1.42″ W x 14.25″ L.. PL63BL Mounting Depth: 1.9″.. PL6984BL Mounting Depth: 3.65″.. PLBWS212 Dimensions: 15.5″H x 29.5″W x 15.5″D.

List Price: $ 499.99

Price: $ 269.99

Pyle Complete Deluxe Audio Package for Car/Truck/SUV — PLA4200 4 Channel 2000 Watt Bridgeable Mosfet Amplifier + PL63BL 6.5-Inch 360-Watt 3-Way Speakers + PL6984BL 6-Inchx 9-Inch 400 Watt Four-Way Speakers + PLBWS212 Dual 12-Inch 1200 Watt Bandpass withNeon Woofer Rings + PLAM14 20 Feet 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit and Speakers Installation Kit.

• PLA4200: 500 Watts x 4 Output,, 1000W x 2 Bridged Output(500W x 2 + 1000W x 1) Dual Variable Hi/Lo Electronic Crossover Network, Dual MOSFET PWM Power Supplies, Variable Input Level ( Gain ) Control, Dual Switchable Bass Boost, Power Protection LED Indicators, Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal / Overload / Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off, S/N Ratio: 95db, T.H.D 0.04%, Freq. Response: 15Hz – 30KHz, 2×20 Amp Maxi Type Fuse.
• PL63BL: One Pair 6.5″ Three-Way Triaxial Speaker Systems, Power Handling: 180 Watts Rms / 360 Watts Max, Non-fatiguing Butyl Rubber Surround, 1″ High Temperature ASV Voice Coil, Standard 6.5″ Size Fits OEM Locations, Blue Poly Injection Cone, 20 oz Magnet Structure, 1″ Neodymium Film Dome Midrange, 3/4″ Piezo Tweeter, Impedance: 4 Ohm, Sensitivity: 89 Db, Frequency Response: 90Hz – 20Khz, Includes Grills, Wires And Mounting Hardware. Mounting Depth: 1.9″.
• PL6984BL: 1 Pair 6″X9″ Four-Way Quadriaxial Speaker Systems, Power Handling: 200 Watts Rms / 400 Watts Max, Non-fatiguing Butyl Rubber Surround, 1.25″ High Temperature ASV Voice Coil, Standard 6″ X 9″ Size Fits OEM Locations, Blue Poly Injection Cone, 50 Oz Magnet Structure, 1-1/2″ Film Dome Midrange, 1″ Film Dome Tweeter, 3/4″ Piezo Tweeter, Impedance: 4 Ohm, Sensitivity: 92 Db, Frequency Response: 50Hz – 20Khz, Includes Grills, Wires And Mounting Hardware.
• PLBWS212: Two 12″ High Power 4 Ohm Subwoofer, Silver Polypropylene Cone, 2″ Aluminum Voice Coil, Specially Treated Black Rubber Edge Suspension, Blue Neon Speaker Rings, Bandpass Alignment For Extra Deep Bass, Plexiglass Front Window, 2 Tuned Ports, 1000 Watts Max Power Handling, Frequency Response: 35Hz-1k Hz.
• PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire, 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Black Grommet.

PLA4200 Dimensions: 10.63″ H x 1.42″ W x 14.25″ L.. PL63BL Mounting Depth: 1.9″.. PL6984BL Mounting Depth: 3.65″.. PLBWS212 Dimensions: 15.5″H x 29.5″W x 15.5″D.

List Price: $ 499.99

Price: $ 269.99

Pyle DVD/Speakers Package for Car/Truck/SUV — PLDN70U 7-Inch Double-DIN Motorized TFT Touchscreen Receiver with DVD/VCD/CD/MP3/MP4/CD-R/USB/SD-MMC Card Slot/AM/FM + PL63BL Pair of 6.5-Inch 360-Watt 3-Way Speakers

• PLDN70U: DVD/VCD/MPEG4/MP3/CD/CD-RW Compatible, Motorized Slide Down Front Panel, Treble/Bass/Balance/Fader/Encoder Volume
• AM/FM-MPX 2 Band Radio, 30 Station Memory, Built-IN 7″ (16:9) TFT Color Monitor, Touch Screen, Res. 1440 x 324 Pixels, Brightness: 200
• Anti-Shock Mechanism, Clock , Selectable View Angle, SD/MMC Card Slot-USB Connector, Wireless Remote Control, Rear Camera Output-Parking Video Input
• On Screen Display/Title/Time/Chapter/Subtitle, 320 Watts (4x80W), Last Position Memory, Selectable USA/Europe Radio Frequency.
• PL63BL: 6.5-inch triaxial speaker with 360 Watts peak power handling, Woofer features, Includes grilles, cable and mounting hardware.

PLDN70U: Dimensions: 7.26″ x 4.08″ x 6.36″.. PL63BL: Mounting Depth: 1.9″

List Price: $ 399.99

Price: $ 249.99

More Pyle PL63BL 6.5-Inch 360-Watt 3-Way Speakers Products