Online Shopping Blog

Pyle Great Amplifier/Subwoofer/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + Pair of PLW12BL 12-Inch 800W Subwoofer + PLAM14 20 Ft. 8 Gauge 1000W Amplifier Hookup For Battery Head Unit and Speakers Installation Kit.

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control, Switchable Bass Boost, Power And Protection LED Indicators
• Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off.
• 2x PLW12BL Blue CD Wave Electro-Plated Cone, Wide Butyl Rubber Surround With New Pattern, Blue steel Basket, Bumped Vented Extended Pole Piece, 2″ High Tempreture Kapton Voice Coil, 4 Ohms Impedance,
• 90 oz. Magnet Structure, 800W Peak Power, Fs:26.2, Qms:5.81, Qes:0.90, Qts:0.78,Vas (Cu ft)4.146, SPL: 85.5dB.
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200 Dimension: 10.63″ H x 1.42″ W x 8.75″ L.. (2X) PLW12BL Overall Diameter: 12.20″ Mounting Depth: 5.34″.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire , 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 C

List Price: $ 219.99

Price: $ 139.99

Pyle Full Amplifier/Subwoofer/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + Pair of PLWCH12D 12″ 1200W Ultra Slim DVC Subwoofer + PLAM14 20 Ft. 8 Gauge 1000w Amplifier Hookup For Battery Head Unit and Speakers Installation Kit

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control, Switchable Bass Boost, Power And Protection LED Indicators
• Low Level Inputs, Gold Plated RCA Inputs Outputs, Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off
• 2x PLWCH12D: 12″ High Quality Poly Mica Cone, Butyl Foam Surround, Dual 2.5″ High Temperature Kapton Voice Coil, Independently Fused 20 Amp Speaker Terminals, 75 Oz Magnet Structure, Power Handling: 600W RMS/1200W Peak,
• Frequency Response:28 Hz – 2.2K Hz, Impedance (Per coil) : 4 Ohm, Fs:29.1, Qms:4.08, Qes:0.44, Qts:0.396, Vas (L)102.18, Efficiency: 92 dB, Includes Installation Template.
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200 Dimension: 10.63″ H x 1.42″ W x 8.75″ L.. PLWCH12D Dimensions: 13.1 x 4.4 x 13 inches.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire , 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse, In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Bla

List Price: $ 299.99

Price: $ 149.99

Alpine KTP-445 Head Unit Power Pack – Amplifier – 4-channel

• Digital amplifier for indash recievers

# plug-and-play compact digital amplifier for Alpine in-dash receivers
# 4-channel amplifier
# 45 watts RMS x 4 at 4 ohms (CEA-2006 compliant)
# selectable high-pass filter (off/80/120 Hz, -12 dB/octave)
# selectable gain switch (high/low)
# fuse: 15A
# 6″W x 2″H x 1-1/8″D

Rating: (out of 10 reviews)

Price: $ 99.00

Related Alpine KTP-445 Head Unit Power Pack – Amplifier – 4-channel Products

Pyramid PB715X 1000 Watts 2 Channel Bridgeable Car Amplifier

• Receiver has BD – DVD – CD player and FM Tuner
• Connections – HDMI Out – 1; Video Out – 1; Digital Input – 2 (optical); Audio Input – 1 AUX (Stereo Mini Jack, 3.5mm)
• Speaker System – Front Configuration – 2-way 3-speaker, Bass-reflex Woofer – 1-3/8 x 4 Cone Type x2
• Pure Direct Sound Speaker – Yes (front, center)
• Advanced Bamboo Cone – Yes (front, center) Approximate Dimensions -

Two Channel idgeable Amplification Tri-way Configuration:1/2 Channels 2 X 500 Watts Total Output @ 4 Ohms 1000 Watts Total System Output @ 4 Ohms Variable Gain Control MOSFET Pulse Width Modulated Power Supply 2 Ohm Stereo Stable Built-In Variable Subwoofer Crossover High Level Low Impedance MOLEX Input Connector RCA Low Level Inputs Speaker Output Terminal Strip Signal/Noise Ratio 90dB THD Less Than 0.04% Frequency Response:15Hz-30kHz Overload Protection Thermal Protection Short Circuit Pro

List Price: $ 111.99

Price: $ 48.37

PYLE PLMRA420 4 Channel 1000 Watt Waterproof Marine Bridgeable Mosfet Amplifier

• 250 Watts x 4 Output
• 500 Watts x 1 Bridged Output
• Dual variable Hi/Lo electronic crossover network
• Dual variable Bass Boost
• Power LED indicator

250 Watts x 4 Output 500 Watts x 2 idged Output (250W x 2 + 500W x 1) Dual Variable Hi/Lo Electronic Crossover Network Dual Variable Bass Boost Power On LED Indicator LED Protection Indicator Blue LED Level Display Tri-Mode Configurable Variable Input Level (Gain) Control Thermal, Overload, Short Circuit Protection Dimensions: 10.9-Inch W x 2.7-Inch H x 12-Inch L

Rating: (out of 2 reviews)

List Price: $ 200.66

Price: Too low to display

Pyle Amplifier/Installation Package for Car/Truck/SUV — PLA2200 2-Channel 1400w Bridgeable Mosfet Amplifier + PLAM14 20 Ft. 8 Gauge 1000w Amplifier Hookup For Battery Head Unit and Speakers Installation Kit

• PLA2200: 700W x 2 Output, 1400W x 1 Bridged Output, Variable Hi/Lo Electronic Crossover Network, Variable Input Level ( Gain ) Control,
• Switchable Bass Boost, Power And Protection LED Indicators, Low Level Inputs, Gold Plated RCA Inputs Outputs,
• Slim Size Amplifier Design For Easy Installation, Thermal/Overload/Short Circuit Protection, Anti-Thump Turn-on, Soft Turn-On Circuit, Remote Turn On/Off,
• S/N Ratio: 95db T.H.D: 0.04%, 2×10 Amp Maxi Type Fuse, Freq. Response: 15Hz – 30KHz
• PLAM14: All Wires and Cables Needed For Installation and Amplifier Hookup.

PLA2200: Dimensions: 10.63″ H x 1.42″ W x 8.75″ L.. PLAM14: 20ft. 8 Gauge Red Power Wire, 4ft. 8 Gauge Black Ground Wire, 20ft. 16 Gauge Blue Remote Turn-On, 20ft. 12 Gauge Stereo Speaker Wire
, 20ft. Stereo RCA Audio Cable (Male to Male), 6ft. Black Split Loom Cable Conduit, AGU Type 60A Gold Plated Fuse,
In-Line Water Resistant Fuse Holder, 2 Ring Terminals: 8G, 2 Spade Terminals: 8G, 5 Spade Terminals: 14-16G, 3 Butt Connectors, 20 Cable Ties, 1 Black Grommet.

List Price: $ 99.99

Price: $ 79.99

More Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Products